Skip to main content
Version: ZIO 1.x

TReentrantLock

A TReentrantLock allows safe concurrent access to some mutable state efficiently, allowing multiple fibers to read the state (because that is safe to do) but only one fiber to modify the state (to prevent data corruption). Also, even though the TReentrantLock is implemented using STM; reads and writes can be committed, allowing this to be used as a building block for solutions that expose purely ZIO effects and internally allow locking on more than one piece of state in a simple and composable way (thanks to STM).

A TReentrantLock is a reentrant read/write lock. A reentrant lock is one where a fiber can claim the lock multiple times without blocking on itself. It's useful in situations where it's not easy to keep track of whether you have already grabbed a lock. If a lock is non re-entrant you could grab the lock, then block when you go to grab it again, effectively causing a deadlock.

Semantics

This lock allows both readers and writers to reacquire read or write locks with reentrancy guarantees. Readers are not allowed until all write locks held by the writing fiber have been released. Writers are not allowed unless there are no other locks or the fiber wanting to hold a write lock already has a read lock and there are no other fibers holding a read lock.

This lock also allows upgrading from a read lock to a write lock (automatically) and downgrading from a write lock to a read lock (automatically provided that you upgraded from a read lock to a write lock).

Creating a reentrant lock

import zio.stm._

val reentrantLock = TReentrantLock.make

Acquiring a read lock

import zio.stm._

val program =
(for {
lock <- TReentrantLock.make
_ <- lock.acquireRead
rst <- lock.readLocked // lock is read-locked once transaction completes
wst <- lock.writeLocked // lock is not write-locked
} yield rst && !wst).commit

Acquiring a write lock

import zio._
import zio.stm._

val writeLockProgram: UIO[Boolean] =
(for {
lock <- TReentrantLock.make
_ <- lock.acquireWrite
wst <- lock.writeLocked // lock is write-locked once transaction completes
rst <- lock.readLocked // lock is not read-locked
} yield !rst && wst).commit

Multiple fibers can hold read locks

import zio._
import zio.stm._

val multipleReadLocksProgram: UIO[(Int, Int)] = for {
lock <- TReentrantLock.make.commit
fiber0 <- lock.acquireRead.commit.fork // fiber0 acquires a read-lock
currentState1 <- fiber0.join // 1 read lock held
fiber1 <- lock.acquireRead.commit.fork // fiber1 acquires a read-lock
currentState2 <- fiber1.join // 2 read locks held
} yield (currentState1, currentState2)

Upgrading and downgrading locks

If your fiber already has a read lock then it is possible to upgrade the lock to a write lock provided that no other reader (other than your fiber) holds a lock

import zio._
import zio.stm._

val upgradeDowngradeProgram: UIO[(Boolean, Boolean, Boolean, Boolean)] = for {
lock <- TReentrantLock.make.commit
_ <- lock.acquireRead.commit
_ <- lock.acquireWrite.commit // upgrade
isWriteLocked <- lock.writeLocked.commit // now write-locked
isReadLocked <- lock.readLocked.commit // and read-locked
_ <- lock.releaseWrite.commit // downgrade
isWriteLockedAfter <- lock.writeLocked.commit // no longer write-locked
isReadLockedAfter <- lock.readLocked.commit // still read-locked
} yield (isWriteLocked, isReadLocked, isWriteLockedAfter, isReadLockedAfter)

Acquiring a write lock in a contentious scenario

A write lock can be acquired immediately only if one of the following conditions are satisfied:

  1. There are no other holders of the lock
  2. The current fiber is already holding a read lock and there are no other parties holding a read lock

If either of the above scenarios are untrue then attempting to acquire a write lock will semantically block the fiber. Here is an example which demonstrates that a write lock can only be obtained by the fiber once all other readers (except the fiber attempting to acquire the write lock) have released their hold on the (read or write) lock.

import zio._
import zio.clock._
import zio.console._
import zio.stm._
import zio.duration._

val writeLockDemoProgram: URIO[Console with Clock, Unit] = for {
l <- TReentrantLock.make.commit
_ <- putStrLn("Beginning test").orDie
f1 <- (l.acquireRead.commit *> ZIO.sleep(5.seconds) *> l.releaseRead.commit).fork
f2 <- (l.acquireRead.commit *> putStrLn("read-lock").orDie *> l.acquireWrite.commit *> putStrLn("I have upgraded!").orDie).fork
_ <- (f1 zip f2).join
} yield ()

Here fiber f1 acquires a read lock and sleeps for 5 seconds before releasing it. Fiber f2 also acquires a read lock and immediately tries to acquire a write lock. However, f2 will have to semantically block for approximately 5 seconds to obtain a write lock because f1 will release its hold on the lock and only then can f2 acquire a hold for the write lock.

Safer methods (readLock and writeLock)

Using acquireRead, acquireWrite, releaseRead and releaseWrite should be avoided for simple use cases relying on methods like readLock and writeLock instead. readLock and writeLock automatically acquire and release the lock thanks to the Managed construct. The program described below is a safer version of the program above and ensures we don't hold onto any resources once we are done using the reentrant lock.

import zio._
import zio.clock._
import zio.console._
import zio.stm._
import zio.duration._

val saferProgram: URIO[Console with Clock, Unit] = for {
lock <- TReentrantLock.make.commit
f1 <- lock.readLock.use_(ZIO.sleep(5.seconds) *> putStrLn("Powering down").orDie).fork
f2 <- lock.readLock.use_(lock.writeLock.use_(putStrLn("Huzzah, writes are mine").orDie)).fork
_ <- (f1 zip f2).join
} yield ()